background image

 

10 

Installation and Operating Instructions for Newbourne 40i Inset Inset Ecodesign Multi Fuel Stove 

Ref: Pevex1030/AH/ver1: 1 April 2019 

6.  Leave instructions for customer 
7.  Check that after initial firing the door seals are not stuck to the body of the stove 

WARRANTY 

The Newbourne 40i Inset stove range is automatically covered by a 12-month warranty for safety, performance 
and construction.  This can be extended by a further  4-year conditional warranty providing that the stove has 
been  installed  by  a  Hetas  approved  engineer  or  suitably  signed  off  by  local  building  control  covering  the 
installation of the stove and, by registering your product within 1 month of the purchase of the stove.   
 
Under the Terms and Conditions of the extended warranty, the installation of the stove will need to both comply 
with the current building regulations and be installed by a qualified Hetas engineer. Furthermore, the stove must 
be  serviced  and  maintained  annually  by  a  suitably  qualified  Hetas  or  chimney  engineer  and  the  certificate  of 
installation and all records/receipts and annual servicing records  will need to be  provided in the event of any 
claim.   
 
Please note, as is normal practice in the industry, bricks, baffles, glass, grate, log retaining fence, ashpan and 
rope seals are considered wearing parts requiring replacement during routine maintenance and as such are not 
covered under any warranty conditions.   
 
Spare parts can be ordered through the stockist who supplied the stove or directly through ourselves.   
 
In the event of any warranty claim then in the first instance a claim must be made with the stockist or stove dealer 
who  supplied  the  stove  and  must  follow  our  Terms  and  Conditions  as  set  out  below.    It  is  entirely  at  Pevex 
decision whether to repair or replace any part that it considers are defective.  Any repaired or replaced parts are 
covered only for the remaining warranty period of the stove unit. 

 

TERMS AND CONDITIONS 

Your Newbourne 40i Inset stove is guaranteed against any defects providing: 

 

1.  The stove was installed according to our instructions and installation was carried out by a qualified Hetas 

or  an  appropriate  Building  Control  Certificate  of  Completion  was  issued  which  must  accompany  any 
claim 

2.  No damage has occurred during the installation 
3.  The  chimney  has  either  been  inspected  and  repaired  as  necessary  or  replaced  with  a  suitable  flue 

system and any high draught issues have been remedied 

4.  The serial number of the stove must accompany the claim 
5.  The stove must be kept in a continuous serviceable condition with no corrosion evident or allowed to 

have taken place.  If older than 12 months then proof of an annual service record must be provided. 

6.  There has been no modifications made to the construction or internals components or incorrect service 

parts installed 

7.  The stove has not been over-fired through: 

a.  Overfilling the firebox with fuel and/or burning it continuously with fully open air sliders 
b.  Burning  incorrect  or  prohibited  fuels  as  mentioned  on  pages  4  &  5  eg.,  house  coal,  fuels 

containing  high  levels  of  petroleum  coke,  sulphur  or  contaminated  wood  (paint,  varnish, 
creosotes etc) 

8.  Excessive ash when burning wood or solid fuel has been removed 
9.  The stove has not been allowed to slumber continuously overnight 
10.  The stove is not used in a damp environment 
11.  The stove has not been used in a commercial environment (rental property, hotel, public barm etc) where 

there  is  opportunity  for  the  members  of  the  public  who  are  not  familiar  to the  operation  to  misuse  or 
abuse the safe operation of it. 

LIMITATION OF WARRANTY 

The warranty is not transferrable and will only stay with the original retail purchaser.  Copy of the original sales 
receipt will need to be seen as proof of purchase. It does not cover such things as unauthorised modifications 
or repairs, misuse or abuse, accidental damage, illegal installations and if the stove has not been serviced every 
12 months. 
 
Pevex  will  not  under  any  circumstances  cover  any  incidental  or  consequential  loss  which  includes  any 
commercial  loss,  damage  to  any  furnishings,  damage  to  non-related  products,  removal/reinstallation  costs, 
transports delay or additional transport costs or any injury to persons or property.    
 
The Pevex warranty does not affect your statutory rights. 

 

Содержание Newbourne 40i Inset Ecodesign
















Отзывы: