PEUGEOT PARS, Руководство пользователя

Страница: 116 / 151

115
5
Changing the lamps
Front lights
In order to dismantle the front lights , it
is necessary to dismantle the forward
bumper and forward vent channel window
first . Then by opening the light installation
screws to the light socket frame, separate
the light combination from the socket
frame.
6-Side lights on the mud guards
- By separating the plastic pins on the
bottom and screws available (within the
limits of the tires), remove the mud shield.
- Pull-out brushed metal of the traffic lights
which is sliding. (1)
- By rotating the traffic lights, remove it from
its place. Rotate the lights counterclockwise
to remove the bulb base. (2)
- change the bulb.
-side light lamp on the mud guard T8.4 = 4
watts, 12 volts.
7-Anti fog lights on the bumper
Remove the blue socket of the anti fog
light. Change the bulb.
The front anti fog light H1= 55 watts, 12
volts.
8-Adjusting screws for front lights
CHANGING LAMPS
1-Front light bulbs
Turn the plastic covers behind the light,
anticlockwise, until it gets separated. Then
change the bulb.
2- Small lights of 5 watts
3- Main lights (Big), lower beam H7= 55
watts.
4- Main lights (Big), upper beam H7= 55
watts.
5-Front side lights
By releasing the Brushed Metal, open the
lamp and then replace it.
Side light lamp of 21watts
WARNING
For replacing the turn signal lamps، needed
to open a large number of components. So,
for this reason it is recommended refer to one
of the dealers authorized for do that.
The bulbs are under vacuumed and, at the
time of replacing may be broken and cause
injuries.