PEUGEOT PARS, Руководство пользователя

Страница: 114 / 151

113
5
CHANGING WHEELS
Putting the reserve wheel
-Put the reserve wheel in to it’s place
properly and tighten the nuts with hands
as much as possible.
-Lower down the jack and remove it from
the place underneath of the car.
-Tighten the wheel nuts with wheel
spanner completely.
-Fix the hubcap on the ring in such a way
that air manifold of the tire comes out of
the related groove. To fix tightly, hit the
fringes of the hubcap strongly with palms
of the hand.
- Put the flat tire (Punctured tire) in place
of reserve tire in rear trunk.
-Put the Jack, wheel spanner and hubcap
spanner on the foam cover and secure
the wheel with belt.
Attention
On vehicles equipped with aluminium wheels:
-There are four screws in the Jack Box for installation of spare steel wheels.
- Fifth wheel is a temporary wheel (to change in urgent situation and when one of
the tires are punctured).
So, due to the mismatch of tires and spare tire, there is no problem if the tire or the
tire crown is different from the other aluminium ring tires.*
WARNINGS
-Jack is only used for changing the
wheels only. Under no circumstances
it should be used for other operations
such as repairs or reaching underneath
of the vehicle.
- If the life time of the reserve tire is
over, take it to the one of the authorized
repair shops, so that you can make
sure about it’s good conditions and
safe usage.
-May be the air pressure in the reserve
tire is not adequate. Therefore drive
calmly and precautionary and as soon
as possible check it’s air pressure.
Also check whether the nuts of the
wheels are correctly secured and
they are absolutely tight.
-Repair the punctured tire quickly so
that in case of any requirements , you
can fix it on your vehicle again.