PEUGEOT ACI -100, Руководство по ремонту

Страница: 9 / 13

r
-
Black key not programmed, carry out
programming procedure.
- Black key defective, replace the key and
carry out programming procedure.
- ACI 100 from another vehicle.
8
LIGHTING UP PHASE OF THE LED
INDICATIONS COMMENTS
PHASE 1 PHASE 3 PHASE 2
FAULT FINDING TABLE FOR THE ACI 100
BLACK KEY: IGNITION ON POSITION
2sec
ACI 100 not programmed - Turns at 2000 rpm maximum
- Carry out a memorisation procedure for
the keys.
0.5sec
ACI 100 programmed - No faults found, starting up possible.
- If starting up impossible, see standard
causes of defective ignition (wiring, spark
plug, coil etc).
0.5sec 2 X 0.5sec permanent
Transponder not recognised - Antenna disconnected or break in the
circuit. Check the resistance of the antenna
which must be at17 ohms at the terminals
of the small connector.
- Key without transponder (try another key,
for example the Master Key, replace the key
if necessary).
0.5sec 3 X 0.5sec permanent
Transponder not authorised
- - - - - -
- - - - - -