PEUGEOT 5008 2017, Руководство пользователя

Страница: 274 / 404

272
In the event of a breakdown
Checking / adjusting tyre
pressures
You can also use the compressor,
without injecting sealant, to check and, if
necessary, adjust the tyre pressures
F
Remove the valve cap from the tyre and
place it in a clean area.
F
Uncoil the pipe stowed under the
compressor.
F
Check that the compressor switch is at
the " O " position.
F
Uncoil fully the electric cable, stowed under
the compressor.
Should the pressure of one or more tyres
be adjusted, it is necessary to reinitialise
the under-inflation detection system.
For more information on
Under-inflation
detection , refer to the corresponding
section.
The tyre inflation pressures are given on
this label.
F
Screw the pipe onto the valve and tighten
firmly.
F
Connect the compressor's electrical
connector to the vehicle's 12 V socket.
F
Switch on the ignition.
F
Start the compressor by placing the switch
at the " I " position and adjust the pressure
to the value shown on the vehicle's tyre
pressure label. To deflate: press the black
button located on the compressor pipe, near
the valve connection.
F
Once the correct pressure is reached, put
the switch to the " O " position.
F
Remove the kit then stow it.