PEUGEOT 308, Руководство пользователя

Страница: 272 / 400

270
Checks
308_EN_CHAP08_VERIFICATIONS_ED02-2013
On vehicles fitted with HDi engines, the fuel
system must be primed if you run out of fuel;
refer to the corresponding engine compartment
view.
Running out of fuel (Diesel)
If the tank on your vehicle is fitted with
a misfuel prevention device, refer to the
"Misfuel prevention (Diesel)" section.

Fill the fuel tank with at least five litres of
diesel.

Open the bonnet.

If necessary, unclip the styling cover for
access to the priming pump.

Squeeze and release the priming pump
repeatedly until resistance is felt (there
may be resistance at the first press).

Operate the starter until the engine starts
(if the engine does not start at the first
attempt, wait around 15 seconds before
trying again).

If the engine does not start after a few
attempts, operate the priming pump again
then start the engine.

Clip the styling cover back in place.

Close the bonnet.
1.6 litre HDi engine
If the engine does not start first time,
don't keep trying but start the procedure
again from the beginning.