PEUGEOT 308 2020, Руководство пользователя

Страница: 96 / 244

94
Driving
Engaging reverse gear
► Slow down until you come to a stop.
► Depress the brake pedal, then press the
Unlock button.
► While maintaining the presses, select
mode R .
Manual mode
Entering the mode:
► With mode D initially selected.
► Press button M ; the green indicator lamp in
the button comes on.
Exiting the mode:
► Push forwards once to return to D .
or
► Press button M ; the indicator lamp in the
button goes off.
Switching off the ignition
To switch off the ignition, the vehicle must be
stationary.
Changing to free-wheeling
For more information on
Changing to free-
wheeling
, refer to the corresponding section.
If you open the driver's door while mode
N is engaged, an audible signal will
sound. It will stop when you close the driver's
door again.
Special aspects of automatic mode
The gearbox selects the gear that offers
optimum performance, taking account of the
► Move the selector by pressing it forwards
( N or R ) or rearwards ( N or D ) once or twice,
passing the point of resistance if necessary.
The push selector returns to its initial position
when released.
For example, to change from P to R , either
push forwards twice without passing the point of
resistance or push just once, passing the point
of resistance:
– In the first case, the gearbox goes from P to N ,
then from N to R .
– In the second case, the gearbox goes directly
from P to R .
Steering-mounted controls
In mode M or D , the steering-mounted control
paddles can be used to change gear manually.
They cannot be used to select neutral or to
engage or disengage reverse gear.
► Pull the " + " or " - " paddle towards you and
release to shift up or down a gear, respectively.
Information displayed on
the instrument panel
When the ignition is switched on, the gearbox
status is displayed on the instrument panel:
P : Park.
R : Reverse.
N : Neutral.
D1...D8 : Automatic mode.
S : Sport programme ou Driver Sport Pack.
M1...M8 : Manual mode.
- : Instruction not processed in manual mode.
If the driver's door is opened with the ignition on,
a message is displayed, prompting you to set the
gearbox to mode P .
Operation
With the engine running, if it is necessary to
press the brake pedal and/or the Unlock button
in order to change mode, an alert message is
displayed in the instrument panel.
Only appropriate attempted changes of mode
are accepted.
With the engine running and the brakes
released, if R , D or M is selected, the
vehicle moves off, even without pressing the
accelerator pedal.
Never press the accelerator and brake
pedals at the same time - risk of damage
to the gearbox!
In the event of a battery failure, you must
place the chock supplied with the vehicle
tools against one of the wheels to immobilise
the vehicle.
Unlocking the gearbox
– From mode
P
:
► Fully depress the brake pedal.
► Press the
Unlock
button.
► While continuing to press the brake pedal
and the
Unlock
button, select another mode.
– From neutral
N
, at a speed below 3 mph
(5 km/h):
► Fully depress the brake pedal.
► While continuing to depress the brake
pedal, select another mode.