PEUGEOT 150 CC, Руководство по ремонту

Страница: 39 / 48

REFITTING SPECIFIC COMPONENTS
37
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
„ Installing the valve clearance.
- Rotate the engine manually either by means
of the pulley or the rotor (as appplicable) in the
direction of operation (clockwise) so as to
bring the rocker pads over the cam lobes.
- Loosen the lock nut of the rocker adjustment
screw.
- By means of feeler gauges, adjust the
clearance of every valve by acting on the
rocker set screw.
Clearances:
• 10/100 at the intake.
• 25/100 at the exhaust.
- Immobilize the rocker set screw.
- Tighten the nock nut.
„
Checking the valve clearance.
- At the intake a 15/100 feeler gauge shouldn't go.
- At the exhaust a 30/100 feeler gauge shouldn't go
On the contrary, if the fealer gauge goes, reset the clearances.