Peugeot Motorcycles PULSION, Руководство пользователя

Страница: 33 / 52

Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles 31/48
)5
*%
'(
,7
(6
1/
*5
6(
37
),
'.
C.Steering unlocked.
Power to the electrical circuit is off.
Turn the handlebar to the left. Press and turn the rotating
knob to this position to lock the steering.
NO SMART KEY RECOGNITION
Should the Smart-Key battery fail, the vehicle can be
started by following these steps:
- Remove the technical access door (Right side).
- Hold the Smart-Key against the emergency antenna.
- Press and hold the rotating knob for 2 seconds.
- Turn the rotating knob to ON.
- The vehicle should start.
Possible causes of non-recognition:
- The vehicle should start.
- The vehicle should start.
- The vehicle should start.
Changing the battery.
If the battery is worn out, the lighted surround on the
rotating knob flashes slowly when the ignition is switched
on.
- Unclip the cover on the key Smart-Key.
- Remove the worn out battery.
- Fit the new key, ensuring it is the right way round
(Positive terminal upwards).
- Clip the cover on.
When unlocking the steering, if the knob
remains pressed down, the lighted
surround flashes quickly for 30 seconds
to indicate an incorrect operation.
You are advised to change the battery
every 2 years.
Battery: CR2032 / 3 Volt.
2
1