4
FALCON MOUNTAIN
C385030E (080710)
6
WORK POSITIONING and RESTRAINT
EN 358: 2000 harness for work positioning and
restraint
These attachment points are designed only to either hold you in
position at the work-post, or to prevent you from entering a zone
where a fall is possible.
These attachment points must only be used to attach to a restraint
or work positioning system, maximum fall height: 0.5 m.
These attachment points are not designed for fall arrest usage.
It may be necessary to supplement work positioning or travel
restraint systems with collective or personal fall arrest systems.
6A. Lateral belt attachment points
Always use the two lateral attachment points together by linking
them with a positioning lanyard in order to be comfortably
supported by the waistbelt. Verify that the connector is properly
closed and locked.
6B. Rear travel restraint attachment point
6B.
6A.
6B.
6A.
GRILLON
EN 358
Maximum
height of fall :
0,5 m
