www.petsafe.net 7
Set Up the Barrier Transmitter
To prevent an unintended correction, never perform
set-up procedures while your pet is wearing the
Receiver Collar.
1. Turn over the Barrier Transmitter and slide
open the battery door. Install three AA alkaline
batteries and replace the battery door.
2. Turn the Barrier Transmitter right side up and
press the UP (+) arrow button once to turn
ON the Barrier Transmitter. A black bar in the
upper right hand corner of the LCD display
window indicates that the Barrier Transmitter is
set to mode A* (
2A
). A second black bar in the
bottom of the LCD display indicates the range
is set to one segment.
2A
3. Each segment represents approximately two feet of diameter.
You can create a Barrier Area of 2 feet in diameter up to 12 feet in
diameter. Using the UP (+) and DOWN (-) arrow buttons, adjust the
range to fit the desired pet Barrier Area.
Step
2
