8 1-800-732-2677
STEP 2
Set Up the Barrier Transmitter
To prevent an unintended correction, never perform setup
procedures while your pet is wearing the receiver collar.
1. Plug the power adapter into the power jack and a standard 120 volt outlet.
2. Adjust the dial clockwise from 2 to 8. The power light will turn red
indicating that the unit is turned on.
3. You can create a barrier area from 2 ft. in radius up to 10 ft. in radius by
adjusting the dial from 2 (minimum range) to 8 (maximum range).
3
4
OFF
ON
MAX.
