www.petsafe.net
3
Prepare the Receiver Collar
Your Receiver Collar comes with short Contact Points.
Long Contact Points for pets with long or thick hair
are available through our Customer Care Center at
1-800-732-2677. Tighten the Contact Points using the
Test Light Tool (
A
) one-half turn beyond fi nger tight.
Check the tightness weekly.
To Insert and Remove the Receiver Collar Battery
Note: Do not install the battery while the Receiver Collar is on
your pet.
This Receiver Collar utilizes a replaceable PetSafe
®
battery
(RFA-67). This unique battery is designed to make battery
replacement easier and increase water protection.
To insert the battery, align the symbols on the battery
(arrow) and Receiver Collar (triangle) (
B
). Use the edge of
the Test Light Tool (
B
) to turn the battery clockwise until the
arrow lines up with the lock symbol on the housing.
To remove the battery, turn the battery counter-clockwise
using the edge of the Test Light Tool (
C
). DO NOT
attempt to cut into or pry open the battery. Be sure to
discard the used battery properly.
A
B
C
Содержание Wireless Pet Containment System Receiver Collar
Страница 18: ...18 1 800 732 2677...
Страница 19: ...www petsafe net 19...
