Petsafe Wireless Pet Containment System Receiver Collar, Руководство по эксплуатации

Страница: 10 / 20

10 1-800-732-2677
Troubleshooting
The Receiver Collar
is not beeping
when setting up the
Boundary Zone. The beep may be diffi cult to hear in a noisy environment. •
Use Test Light as explained in the “Test Light Instructions” •
section, and use it to determine the location of Boundary Zone.
Check that the Transmitter is set up according to directions
•
and install a new battery within 5 feet of the Transmitter.
Re-Synchronize the System. (page 14)
•
The Receiver Collar
is not beeping or
administering a
Static Correction.
Check that the Transmitter is plugged into a working •
120-volt outlet, turned on, the Power Light is on, and the
Transmitter controls are set at your desired settings.
Check Receiver battery to make sure it is installed properly.
•
When replacing the battery, do so within 5 feet of the Transmitter. •
Re-Synchronize the System. (page 14) •
The Receiver
Collar is beeping
everywhere. Check that the Transmitter is plugged into a working •
standard 120-volt outlet, turned on, the Power Light is on,
and the Transmitter controls are set at your desired settings.
Bring Receiver Collar within 5 feet of the Transmitter to reset.
•
Re-Synchronize the System. (page 14) •