background image

22 

Customer Care Center 1-800-732-2677

Taking Your Pet Out of the Pet Area

Important: Remove the Receiver Collar and leave it in the Pet Area.

Once your pet learns the Boundary Zone, he will be reluctant to cross it for walks or car 

rides.

Option 1:

 Replace the Receiver Collar with a regular collar. Put your pet in a car that is 

within the Pet Area and drive him out of the Pet Area.

Option 2:

 Replace the Receiver Collar with a regular collar and leash. Walk your pet 

out of the Pet Area while giving a command such as “OK” at a specific place of the 

Boundary Zone (the end of your driveway, sidewalk, etc.). Always leave the Pet Area 

with a leash at this place and your pet will associate leaving the Pet Area only on a 

leash, only at this place, and only with a person. You may initially need to convince your 

pet to leave the Pet Area with a food treat and lots of praise.
Note: You may also carry your pet out of the Pet Area.

Congratulations! You have now successfully completed the training program.

Working with PetSafe

®

 Pawz Away

®

 Pet Barriers

Your UltraSmart

®

 Receiver Collar also works with our Pawz Away

®

 deterrence products 

to keep your pet away from areas inside or outside your home. 
The Pawz Away

®

 Indoor Pet Barrier (part number ZND-1000) protects areas inside your 

home and can teach your pet to stay off of furniture, away from trash or out of certain 

rooms. The small, battery operated Indoor Barrier fits discreetly inside your home and 

protects a circular area up to 12 feet in diameter. (

13A

The Pawz Away

®

 Outdoor Pet Barrier (part number RFA-378) teaches your pet to 

avoid areas in your landscape. The waterproof and battery operated Outdoor Barrier 

is disguised as a rock to blend into your landscape. It can wirelessly protect a circular 

area up to 16 feet in diameter or protect a custom shaped area using up to 150 feet of 

Boundary Wire. (

13B

)

The Pawz Away

®

 Pet Barrier systems are easy to operate and you can use more than 

one to protect multiple areas. Purchase the Pawz Away

®

 Pet Barriers by visiting our 

website at www.petsafe.net or by calling the Customer Care Center.

13A

13B

Accessories

To purchase additional accessories for your PetSafe

®

 In-Ground Fence

, contact the Customer Care Center or 

visit our website at www.petsafe.net to locate a retailer near you.

Component

Part Number

Power Adapter for the Fence Transmitter

RFA-373

Surge Protection Kit

LP-4100-1

Replacement Collar Strap

RFA-382

Additional UltraSmart

®

 Receiver Collar

PIG00-13620

Additional Boundary Wire

RFA-1

Additional Boundary Flags

RFA-2

Additional Gel-filled Capsules and Wire Nuts

RFA-366

Wire & Flag Accessory Kit

PRFA-500

Fence Transmitter

M024103LF

Wire Break Locator

RFA-450

Receiver Collar Charger

IUA-005

Contact Point Accessory Pack

RK-23

Содержание ultrasmart in-ground fence PIG00-13619





























Отзывы: