Petsafe Stay & Play PIF00-13663, Руководство по эксплуатации продукта

Страница: 6 / 20

1-800-732-2677 6
B
O
U
N
D
A
R
Y
Z
O
N
E
Transmitter
Pet Area
Note: In many
neighborhoods,
nearby property line
may limit how large
the Pet Area can be.
Maximum
105 ft. range
(53 average steps)
How the System Works
The PetSafe
®
Stay & Play
™
Wireless Fence for Stubborn Dogs has been proven safe, comfortable and effective for pets over 5 lb. The system
works by transmitting a radio signal up to 105 feet in all directions. You temporarily define the pet area with boundary flags for a visual aid in
training your pet. Your pet wears a receiver collar with contact points that touch his neck, and, once trained, is allowed to roam freely in the pet
area. When your pet reaches the boundary zone, the receiver collar gives a warning tone before delivering a safe static correction through the
contact points to get his attention until he returns to the pet area.
Key Definitions
Transmitter:
Transmits the radio signal and is the center of the pet area.
The transmitter needs to be located indoors.
Pet Area:
Distance from the transmitter where your pet can roam freely.
Boundary Zone:
2 to 3 foot wide area outside the pet area where your
pet’s receiver collar will begin to tone and then begin to deliver a
static correction. The correction will start in the boundary zone
and continue anywhere beyond the pet area.
Note
: The receiver collar is equipped with a safety time-out
feature that will stop correcting after 15 seconds if your pet
remains outside the pet area.
Receiver Collar:
Receives the radio signal from the transmitter.
Mode Button:
Turns receiver ON/OFF and adjusts the level
of static correction your pet receives outside the pet area.
Receiver Indicator Light:
Indicates the level of correction
at which the receiver collar is set. This light also serves
as a low battery indicator.
Receiver Charger:
Charges the batteries inside the receiver collar.
Receiver Charge Jack:
Connection port for charging receiver battery.
Contact Points:
Deliver the safe static correction when
your pet moves into the boundary zone.
Power Jack:
Where the power adaptor plugs into the transmitter.
The transmitter is powered by a standard 120 volt outlet.
Boundary Switch:
Adjust according to the size of the pet area desired.
Note
: Adjusting the switch does not change the level of static correction on
the receiver collar.
Power Light:
Indicates when the transmitter is on.
Boundary Control Dial:
Adjusts the distance from the transmitter to the boundary zone.
Note
: Adjusting the dial does not change the level of static correction on the receiver collar.
Power Loss Alarm:
Sounds an alarm which indicates power has been removed from the transmitter.
Transmitter Receiver Collar
Contact
Point
Receiver
Indicator
Light
Mode
Button
Boundary
Control Dial
Power
Jack
On/Off
Switch
I = On
O = Off
Boundary
Switch
+ = High
- = Low