www.petsafe.net 11
MODE
UPPER BUTTON
FUNCTION
LOWER BUTTON
FUNCTION
SIDE BUTTON
FUNCTION
# OF
DOGS
1
Tone B only
Tone B one second then
continuous stimulation
set by Intensity Dial
Tone A only
1
2
Tone B only
Continuous stimulation
set by Intensity Dial
Tone A only
1
3
Tone B one second then
continuous stimulation
set by Intensity Dial
Continuous stimulation
set by Intensity Dial
Tone A only
1
4
Continuous stimulation
set by Intensity Dial
Continuous stimulation
two levels higher than
Intensity Dial setting
Tone A only
1
5
Continuous stimulation
set by Intensity Dial
Continuous stimulation
two levels higher than
Intensity Dial setting
Tone B only
1
6
DOG #1
Continuous stimulation
set by Intensity Dial
DOG #2
Continuous stimulation
set by Intensity Dial
DOG #3
Continuous stimulation
set by Intensity Dial
3
7
DOG #1
Tone A only
DOG #2
Tone A only
DOG #3
Tone A only
3
8
DOG #1
Tone B only
DOG #2
Tone B only
DOG 3#
Tone B only
3
Note: Continuous stimulation will transmit for no more than eight continuous seconds no matter how long
the button is pressed. To reactivate, release and repress the button.
STEP 5
Reset the Receiver Collar
To reset the Receiver Collar to work with a new Handheld Remote or to reprogram a new Receiver
Collar to work with your existing Handheld Remote:
1. Turn the Receiver Collar off.
2. Press and hold the On/Off Button until the Receiver Indicator Light comes on solid green and the
Receiver Collar beeps low to high.
3. Continue to hold the On/Off Button until the Receiver Indicator Light has turned off.
4. Press and hold the Upper Button on the Handheld Remote until the Receiver Indicator Light
flashes 5 times and beeps 5 times. You may need to hold both units 3 feet from each other before
this occurs. Once the Receiver Indicator Light has flashed 5 times, the Receiver Collar has been
reset. If the Receiver Indicator Light does not flash 5 times, start again and repeat the process.
