www.petsafe.net
5
Key Defi nitions
Mode Push-button:
Adjusts the levels
of Static Correction your dog receives
when barking. This push-button is also
used to turn the Bark Control Collar off,
and to test it.
Indicator Light:
Indicates that the Bark
Control Collar is functioning properly in
the Test Mode. This light also serves as a
low battery indicator.
Sound Activated Sensor:
Detects the
sound of your dog’s bark.
Battery
Mode
Push-
button
Indicator
Light
Sound
Activated
Sensor
Contact Points
Washers
Sensor Probe
Sensor Probe:
Detects the vibrations of your dog’s bark.
Note: The Sensor Probe is not adjustable.
Contact Points:
Deliver the safe Static Correction.
____________________________________________________________________
Fit the Bark Control Collar
Important: The proper fi t and placement of your Bark Control Collar
is important for effective operation. The Contact Points must have
direct contact with your dog’s skin on the underside of his neck.
To assure a proper fi t, please follow these steps:
1. Make sure that the battery is not installed in the Bark
Control Collar.
2. Start with your dog standing comfortably.
3. Place the Bark Control Collar on your dog’s neck close
to the ears. Center the Contact Points underneath your
YES
NO
dog’s neck, touching the skin.
Note: It is sometimes necessary to trim the hair
around the Contact Points to make sure that
contact is consistent.
4. Check the tightness of the Bark Control Collar by inserting one fi nger
between the end of a Contact Point and your dog’s neck. The fi t should be
snug but not constricting.
