EN
ES
FR
IT
NL
DE
www.petsafe.net 13
12 www.petsafe.net
Prepare Passport
™
Key
Attach the Passport
™
Key to your pet’s collar using the included split key rings.
For best results, attach the Passport
™
Key to the front of your pet’s collar. The
Passport
™
Key should hang under your pet’s neck and parallel to the flap so
the Dog Door can properly read the key.
INSTALLATION
Checklist Before Installation
Before installing the Passport
™
Intelligent Dog Door, it is important to consider the following:
*
Clock Battery is installed.
*
If using the Power Adaptor, you have located a power outlet in planned location on inside of home where Power Adaptor can plug in. If not,
you have a power cord extension to reach the outlet or are using the optional Passport
™
Rechargeable Battery instead (sold separately) as the
power source.
*
Planned location has been checked for possible Radio-Frequency Interference by ensuring all common household appliances and electronic
devices are at least 60 cm away.
*
Power Adaptor and Motion Sensor Wires have been disconnected or if using optional Passport
™
Rechargeable Battery, it has been removed.
*
“Initial User Setup” steps to set the language, time and date have been completed.
*
Each dog to use the Dog Door has been successfully programmed.
*
Each Passport
™
Key has been tested in the installation location on both interior and exterior side and the Dog Door can read each key.
*
If installing in a door, will any components of the Passport
™
Intelligent Dog Door be obstructed by the door opening and closing?
*
If installing in a wall, do you have a Passport
™
Wall Entry Kit? The Passport
™
Intelligent Dog Door fits doors or applications up to 51 mm thick.
Wall installations and thicker applications 95 mm up to 305 mm require the Passport
™
Wall Entry Kit (sold separately).
*
If installing in a wall, are there any objects (such as doors, shrubs, heat pump, etc.) that could obstruct the Dog Door once installed?
*
If installing in a wall, have you checked for electrical and plumbing fixtures in the wall where you plan to install the Dog Door?
Tools Required
• Hammer
• Jig or Keyhole Saw*
• Phillips Screwdriver
• Slotted Screwdriver
• Drill
• 13 mm (½”) Drill Bit
• Level
• Tape Measure
• Masking or Painter’s Tape
• Duct Tape
• String
• Pencil
• Safety Equipment
• Optional:
Silicone Adhesive
*
With appropriate blade type and length; example, a metal door would require a blade for metal.