10
Customer Care Center 1-800-732-2677
Tone Only
When pressing Tone Only for Dog 1 or Dog 2 the
number zero appears.
Battery Indicator
The battery indicator provides constant
awareness of your battery’s power level. See
Battery Indicator for more detailed information.
Note: Factory preset is for Dog 1 mode, you will not see the Dog 2 symbol unless the unit is
programmed for Dog 2 (see Two Dog System on page 14).
Battery Indicator
Battery is at
2
⁄
3
to Full capacity.
Remote is fully functional.
Battery is at
1
⁄
3
capacity. Remote
is still fully functional.
Battery is at
1
⁄
6
capacity. Remote will
operate the Receiver, but should be
recharged as soon as possible.
Battery is almost dead. Remote
is unable to operate the
Receiver.
When the Battery Indicator shows the low battery symbol (
1
⁄
6
capacity), recharge your Remote soon.
When the battery outline is displayed, the Remote’s battery is unable to power transmissions to the
Receiver. Remote must be recharged to regain operation.
Handheld Remote Functions for Dog 1
Remote Function
Button Color
Digital Display Response
Upper Left Button
Green
Tone Only
Lower Left Button
Yellow
Stimulation
Upper Right Button
Grey
Stimulation level Up
Lower Right Button
Grey
Stimulation level Down
Boost Button
Red
+2 above selected Stimulation Level
See Two Dog System on page 14 for Handheld Remote functions in Dog 2 mode.
Handheld Remote Belt Clip
To remove:
1. Press and hold the Release Lever on the Belt Clip, pulling away from the Remote.
2. Slide the Belt Clip out of the insert.
To replace:
1. Slide the Belt Clip into the insert until it clicks, locking into place.