www.invisiblefence.com
7
Computer Collar
®
unit not responding
to signal fi eld
(loop) wire.
• Power Cap
®
unit in the Computer Collar unit
is dead or weak.
• Signal fi eld wire has a break.
• Power is not supplied to the transmitter or
power is out.
• Frequency switch on transmitter was changed.
• Replace the Power Cap unit.
• Contact your Invisible Fence
®
Brand Dealer.
• Make sure transmitter power supply is plugged in.
______________________________________________________
Important Warnings
Your Invisible Fence
®
Brand Dealer has professionally installed your pet containment system and ensured it is working
properly. You will want to perform periodic maintenance checks to make sure the system is properly functioning for your
pet’s safe containment.
Invisible Fence Brand pet containment systems have contained over two million pets. However, there are some
precautions you should take.
Warning 1:
Not every pet can be trained to avoid the established boundary. Sometimes even a properly trained pet may cross the
boundary. Therefore, Invisible Fence, Inc., as well as Invisible Fence Distributors and Dealers cannot guarantee the system
will, in all cases, keep a customer’s pet within the established boundary. Accordingly, if a customer has reason to believe that
their pet may pose a danger to others, or harm itself, the customer should not rely solely upon the Invisible Fence Brand pet
containment system to keep the pet from crossing the boundary.
Warning 2:
The control panel component of the system includes visual and audible signals to warn of a system malfunction. The control
panel should be installed where such signals may be easily seen and heard. If the control panel is installed in an enclosed
box, or in a place not readily accessible to the customer, the customer will not benefi t from the system’s warning functions,
for which Invisible Fence, Inc., as well as Invisible Fence Distributors and Dealers assume no responsibility.
