www.petsafe.net
21
FI
DA
SV
EN
NO
Care and Cleaning
The Healthy Pet Simply Feed
™
comes apart for easy cleaning. The washable parts
are: stainless steel bowl, bowl holder, hopper lid, hopper and conveyor. The stainless
steel bowl, bowl holder, hopper lid and hopper are dishwasher safe. Only clean the
conveyor by hand-washing using cool or warm soapy water. These washable parts can
be submerged in water. Rinse and let all parts air dry completely before assembling pet
feeder.
DO NOT use hot water, submerge the hopper base in water or
clean the conveyor in an automatic dishwasher.
Do NOT immerse control panel in water. Base unit should
NOT be submerged in water at any time, as this may damage
electronic components.
To Clean Pet Feeder:
1. If you have any food in the pet feeder, press
UP
and
ENTER
buttons
AT SAME
TIME
to unlock 5-button Navigation. Next run the “To Prepare Conveyor with
Food” cycle by pressing the
ENTER
and
LEFT
buttons
AT SAME TIME
. This will
dispense any food remaining in the conveyor and hopper into the bowl. Repeat
the “To Prepare Conveyor with Food” until no more food is dispensed or just a few
pieces of food are dispensed from the pet feeder.
2. Set pet feeder to
PAUSE FEED MODE
. This
keeps the conveyor in sync with the feeding
schedule when reassembled.
3. Remove stainless steel bowl from bowl holder
by first lifting up back of bowl and then front.
4. Remove lid by pulling back finger latch then lifting up using finger grips (see
“
Remove From Package
” section).
5. Remove hopper by pressing hopper
release button on back of pet feeder
then lift to remove (see “
Clean
Removable Parts
” section).
6. Remove conveyor by pulling back
red conveyor latch to unlock.
Lift to remove (see “
Clean
Removable Parts
” section).
7. Remove conveyor crumb catcher by gently pressing in sides and pulling down.
8. Remove bowl
holder by
releasing one
tab on inside of
pet feeder base
using a finger-
nail or screw
driver while
gently pulling
down on same
