Petsafe Drinkwell Seascape, Быстрый старт

Страница: 6 / 12

Customer Care Center 1-800-732-2677
6
Assemble Pet Fountain
1. Rinse all fountain components (except for the
adapter) with warm water before using the pet
fountain. This will remove any residue from the
manufacturing process.
2. Take the pump apart by first removing the
faceplate. You may need to use a fingernail to
pry it off.
3. Remove the teardrop shaped stator by pulling up
on the small lip.
4. Use a fingernail to pull out the impeller, which is
held in place magnetically.
5. Clean the pump parts with warm water and soap,
then reassemble.
6. Place the pump into the foam filter with the cord
running above it.
2
3
4
6