+1 (800) 732-2677
4
In the Box
Operating Instructions
Important: DO NOT RUN DRY - FOR INDOOR USE ONLY.
Note:
Rinse all fountain parts with warm water before operating the pet
fountain. This will remove any dust or residue that remains in the system from
the manufacturing process.
1. Carefully remove all the pet fountain components from the packaging and
set aside prior to assembly.
2. As with any electrical device, check the electrical power cord for any
tears or damage before use.
3. Inspect the bottom of the pet fountain to be sure the pump is securely
attached (
Fig. 1
).
4. Remove the housing lid and insert the carbon filter. The carbon filter fits
narrow side down, with the black side facing the front of the fountain
(
Fig. 2
).
Important: Rinse the carbon filter thoroughly under cool water
before placing in the pet fountain. This will remove any loose
carbon dust, which is harmless to your pet.
5. Place the pet fountain in a desired location before adding the reservoir.
Never pick up a full fountain by the housing. Only pick up the fountain
by placing both hands underneath the base of the bowl and grip the
sidewalls for a sturdy hold.
6. Fill both the bowl and the housing with water until the water reaches the
fill level in the bowl.
7. Fill the reservoir with water.
8. Check the reservoir cap to make sure the black o-ring is in place, then
screw the reservoir cap onto the reservoir.
1 Gallon
Reservoir
Bowl
Housing Lid
Pump
Carbon Filter
Flow Control
Knob
Housing
Intake Plate
Fig. 1
PUMP
Fig. 2
