www.petsafe.net
7
Fit the Receiver Collar
Important: The proper fi t and placement of your Receiver Collar is important for
effective operation. The Contact Points must have direct contact with your dog’s
skin on the underside of his neck.
To ensure a proper fi t, please follow these steps:
1.
Make sure that the battery is not installed
in the Receiver Collar.
2.
Have your pet standing comfortably (
3A
).
3.
Centre the Contact Points underneath your dog’s neck,
touching the skin (
3B
).
YES
NO
3A
Note: It is sometimes necessary to trim the hair around the
Contact Points to make sure that contact is consistent.
3B
4.
The PetSafe QuickFit™
Collar is designed so you can
quickly attach and remove
the Receiver Collar from your
dog while maintaining the
desired fi t.
a. With the Snap Buckle
fastened (
3C
), thread
the collar through the
Metal Buckle (
3D
).
Snap Buckle
“C” Loop
Metal Buckle
3C
3D
b. Slide the excess collar through the “C” Loop on top of
the Snap Buckle (
3E
). This will hold the collar in place.
c. Once the collar fi t is determined, simply use the
Snap Buckle to remove and replace the collar.
5.
The Receiver Collar should fi t snugly, yet loose enough to
allow one fi nger to fi t under the strap (
F
). Allow your dog
to wear the collar for several minutes, then re-check the fi t.
3E
Check the fi t again as your dog becomes more comfortable
with the Receiver Collar.
6.
Trim the collar as follows:
a. Mark the desired length of the collar with a pen. Allow for
growth if your dog is young or grows a thick winter coat.
b. Remove the Receiver Collar from your dog and cut off excess.
3F
Step
3
Содержание comfortfit trainer
Страница 65: ...www petsafe net 65 ...
Страница 66: ...66 www petsafe net ...
Страница 67: ...www petsafe net 67 ...
