Petsafe Big/Little Dog Remote Trainer, Руководство по эксплуатации и обучению

Страница: 9 / 20

www.petsafe.net 9
Find the Best Intensity Level for Your Pet
The Remote Trainer has ten (10) different Intensity Levels. This allows you to choose
the stimulation that is best for your pet.
Note: Always start at the lowest level and work your way up.
Once you have placed the Receiver Collar on your pet, it is time to fi nd the Intensity
Level that is best for your him. This is called the Recognition Level.
A slight change in your pet’s behavior, such as looking around in curiosity, scratching at
his collar, or fl icking his ears, indicates the Recognition Level that is best for him.
Follow the steps below to fi nd your pet’s Recognition Level:
1. Press the Tone Button for 2 to 3 seconds. If your pet reacts to this, you may use this
button for training. If your pet shows no reaction, go to the next step.
2. Starting at Level 1, press the Stimulation Button continuously for 2 to 3 seconds.
3. If your pet shows no reaction, go to the next Intensity Level and repeat the process.
4. Repeat each Intensity Level several times before moving to the next level.
5. YOUR PET SHOULD NOT VOCALIZE OR PANIC. IF THIS HAPPENS, GO
BACK TO THE PREVIOUS LEVEL AND REPEAT THE PROCESS.
6. If your pet continues to show no response at Level 10, check the fi t of the Receiver
Collar.
If all of these steps have been done and your pet continues to show no reaction to the
stimulation, contact the Customer Care Center at 1-800-732-2677.
_____________________________________________________________
Understanding the Remote Transmitter
To train using the Tone Button:
The audible sound emitted by the Receiver Collar can be just as effective as the
stimulation for some dogs. The Transmitter Indicator Light will glow for as long as
this button is pressed. To use this button for training, simply substitute “Tone Button”
whenever “Stimulation Button” is used in the Training Guide section.
To train using the Stimulation Button:
You control the timing of the stimulation being applied to your pet. The stimulation
stays on as long as the Stimulation Button is pressed. If this button is pressed longer
than 8 seconds, the Remote Transmitter will “time-out,” the Transmitter Indicator Light
will turn off, and stimulation will no longer be delivered to your pet. This is a safety
feature in the Remote Transmitter. If the Remote Transmitter times out, release the
Stimulation Button and press it again to deliver stimulation.
Note: For either one or both of these training methods to be effective, they must be used
consistently along with the command you are trying to teach your pet.
Step
4