Petsafe Big/Little Dog Remote Trainer, Руководство по эксплуатации и обучению

Страница: 18 / 20

18 1-800-732-2677
To Pair the Remote Transmitter
and Receiver Collar
If your Receiver Collar does not beep when the Tone Button of the
Remote Transmitter is pressed, or if you feel the Receiver Collar is
not responding to the Remote Transmitter:
1. With the Receiver Collar off your pet, turn the Receiver Collar on.
2. Turn the Intensity Level Dial on the Remote Transmitter to “
1 ”.
3. Separate the Remote Transmitter and the Receiver Collar by 2
feet.
4. Press both the top and bottom buttons on the Remote
Transmitter at the same time and hold for ten seconds.
5. The Receiver Collar should emit two beeps.
6. If the Receiver Collar does not beep twice, please contact the
Customer Care Center at 1-800-732-2677.
Test Light Instructions
1. Hold the Test Light Contacts to the
Contact Points.
2. Press the Stimulation Button on the
Remote Transmitter.
3. The Test Light will fl ash. Note: At higher
Intensity Levels, the Test Light will fl ash
brighter.
Save the test light for future testing.
Test Light
Contacts
Note: If the Test Light does not fl ash, install a new battery and re-test. If Test Light still does not fl ash,
contact the Customer Care Center at 1-800-732-2677.