Petra 242120, Руководство пользователя

Страница: 15 / 56

15
EN
Mounting the coffee dispenser
(fig. N & O)
Place the coffee dispenser filter (6) in the •
coffee dispenser (5).
Mount the coffee dispenser (5) to the
•
appliance by turning it counterclockwise.
Mounting the coffee pad cassette
If you use coffee pads, refer to the chapter •
"Making coffee with coffee pads".
If you use ground coffee, refer to the chapter
•
"Making coffee with ground coffee".
Mounting the milk frothing unit
(fig. K)
Slide the flexible tube (21) over the tube •
adapter (22).
Insert the tube adapter (22) into the milk
•
froth dispenser adapter (23).
Mount the milk froth dispenser adapter
•
(23) to the steam valve (24).
Mount the milk froth dispenser (8) to the
•
milk froth dispenser adapter (23).
Troubleshooting
Refer to the table below to solve problems
yourself. If you are not able to solve the
problem yourself, contact our service station.
The red light flashes, but the water •
reservoir is filled.
- Empty the water reservoir.
- Shake the empty water reservoir to
check whether the float moves freely.
- Clean or descale the water reservoir.
The rinsing process cannot be started.
•
- Make sure that the water in the water
reservoir is cold.
- Set the dispenser selector to position 'C'.
No water runs from the dispenser outlet
•
during the rinsing process.
- Set the dispenser selector to position 'D'.
The dispenser selector jams long before the
•
dispenser selector is in position 'D'.
- Make sure that the coffee pads are
correctly placed in the coffee pad cassette.
Water escapes from the coffee pad cassette. •
- Make sure that the coffee pads are
correctly placed in the coffee pad
cassette.
Water comes under the appliance. •
- Empty the drip tray.
- Only fill the water reservoir up to the
maximum mark.
- Only remove the water reservoir from
the appliance briefly for filling or cleaning.
The coffee is too weak. •
- Choose a stronger type of coffee.
- Set a lower coffee quantity using the
coffee quantity selector.
- Make sure that the coffee pads are
correctly placed in the coffee pad cassette.
The coffee is too strong. •
- Choose a weaker type of coffee.
- Set a higher coffee quantity using the
coffee quantity selector.
The cream layer is deteriorating. •
- Regularly clean and descale the coffee
dispenser filter.
- If the two filters of the coffee dispenser
filter are pressed against each other,
replace the coffee dispenser filter.
No coffee emerges, but the pump is •
operating.
- Move the dispenser selector to the left
as far as possible.
- Make sure that the central opening of
the coffee pad cassette is not clogged by
calcium or coffee residue.
Hot water cannot be removed. •
- Set the dispenser selector to position 'B'.
The water in the water reservoir heats up.
•
- Set the dispenser selector to position 'B'
or 'D'.
- Make sure that the central opening of
the coffee pad cassette is not clogged by
calcium or coffee residue.
The appliance switches off after heating. •
- If the coffee-making temperature is not
achieved during heating, the appliance
will switch off after approximately
2 minutes.
- Do not use the appliance in locations
higher than 1,500 m above sea level.
The dispenser selector cannot be set to •
position 'A'. No coffee emerges while the
pump is operating.
- Remove the mains plug from the wall
socket and leave the appliance for
several hours to reduce the pressure.