Petite & Mars Prime II ISOFIX, Инструкция по эксплуатации

Страница: 68 / 72

68
69
The correct belt height of the shoulder belts is attained
when the belt disappears into the shell slightly above
the shoulder of the child.
Make sure that shoulder belts fi t properly over the
shoulders of the child.
1. Adjust the belts:
Loosen the harness straps by pressing the release button
an pulling the harness straps as far as you can.
Note! Do not pull the shoulder pads.
2.
Nine heights of the headrest:
The headrest can be set at fi ve diff erent heights in group
1 mode with the shoulder belts axle in place. There are
four additional positions in Group2 and 3 mode once the
shoulder belts axle and harness straps has been taken off .
3. Press the button on the Headrest handle on the top
of the seat. It is important to make sure the headrest
fi t properly to head.
4. Recline Positions of the car seat:
The car seat can be used in 5 Recline positions.
Lift the recline adjustment handle under the front of the
seat up and pull or push the shell forwards or backwards.
Release the handle in the required position and push until
you hear a distinct click.
Securing your baby using the harness
1. Loose the harness straps by pressing the release button
and pulling the harness straps as far as you can.
Note! Do not pull the shoulder pads.
How to adjust the belts, headrest and seat positions
1
5
1
5
1
5
Click