Petite & Mars Prime II ISOFIX, Инструкция по эксплуатации

Страница: 64 / 72

64
65
1. This car seat can be used with ISOFIX anchors plus top tether for group I child safety seat
(9 to 18 kg).
2. The car seat must be used with ISOFIX anchor plus top tether and the three-point seat
belt together for group II a III child safety seat (15 to 36 kg).
3. This car seat must be installed in the rear seat of the vehicle and facing in the direction
of travel. (1)
1. Press the Release button to release the ISOFIX
connectors.
2. Push the ISOFIX connectors directly into
the anchorages until you hear an audible sound „click“.
Tips: If the ISOFIX connectors
are correctly installed, the Release
button will pop out, and you can see
a clear green mark on it.
3. Grasp the seat body to check
the seat if it is fastened tightly
or shakes. If the seat shakes
and the ISOFIX connectors
are pulled out, please repeat
the above steps and install it again.
4. Pull out the Top tether and press
the Tether strap to extend the strap
until it is long enough to hook
the User-ready tether anchorage
behind.
5. Hook the Tether strap hook onto
the User-ready anchorages.
Check there maybe are
3 anchorages for the hook,
please find one in your favor. 6.
Pull the Tether strap on another
end back to tighten the Top teher.
Group I (9-18 kg) Isofix and Top Tether
Installation in the vehicle
Click
Click
Click