Copyright © 2019, Petique, Inc., All Rights Reserved.
| 6 |
Fig. 5
Fig. 7
Fig. 8
Fig. 9
Fig. 6
5) Insert the three metal tubes into the loops provided. Starts from the inside
of the first loop to the inside of the second loop (Fig. 5).
6) Place the Mattress on the top and bottom floor of the frame with the
padded side facing up (Fig. 6).
7) Insert the four hooks and loop straps
located on the underside of the Mattress
through the slots in the floor of each end
of the frame
(Fig. 7).
8) Fasten the hooks and loop straps to the
underside of the frame floor to prevent
the Mattress from moving (Fig. 8).
If you experience difficulty and one side
of the rail will lock but the other side will
not then, unlock the rail by squeezing the
release in the center and try again. If you
still have difficulty, contact our Customer
Service Center at 1-800-421-1902 or visit us
online at www.petique.com.
TO REMOVE THE MATTRESS PAD FROM PET
PAD:
9) Mattress Pad and Pet Pad are attached
by four (4) hooks and loop straps. In
order to separate them, hold Pet Pad
with one hand and pull Mattress Pad
away with other hand (Fig. 9).
1. Starts from the inside of the first loop
2. Through the inside
of the second loop
