When charging, the LED light is red; when fully charged, it turns to green.
Under “light” mode, press the “launch” mode, and the LED light in the collar-
receiver will flash green every one sec.
In “standby” status, the LED light in the collar-receiver will flash green every
four seconds.
After turning on the receiver, press and hold the ON/OFF/ENCODE button for
five seconds to encode it.
Prepare the remote transmitter:
Charge the remote transmitter
1. Connect the charger connector to the charging hole.
2. Plug the charger into a standard outlet.
3. The red light in the transmitter will be on, indicating that charging is
taking place.
4. Charge the transmitter at least 2 hours for first charge or until indication
that charging is complete.
5. When charging is complete, the red light will turn off automatically.
6. Low Battery Indicator “ ” signals the need for recharging.
How to use the remote transmitter
1
.
To turn on/off the transmitter, press any button on the transmitter.
2. Press the MODE button to toggle among 4 different modes
3. Press UP/DOWN buttons on the light hand side of the transmitter to
adjust the intensity level of vibration or static shock.
4. “1/2” button indicates either channel 1 or channel 2 on the transmitter.
Select one channel for use with one collar-receiver.
5. The remote transmitter will go into STANDBY MODE if no operation
for 2 minutes and will turn off if no operation for 5 minutes.
6. In STANDBY MODE, press any button to wake it up. When turned off,
press and hold the MODE button for 1 second to turn on the transmitter.
Prepare the Collar-receiver:
Charge the collar-receiver
1. Connect the charger connector to the charging jack.
2. Plug the charger into a standard outlet.
3. The red LED light in the collar-receiver will turn on. (A)
4. Charge the collar-receiver for at least 2 hours for the first charge or
until indication that charging is complete.
5. After the receiver has been fully charged, the red light LED light will
turn off automatically. (B)
6. When charging is finished, put the rubber cover in place to keep the
internal unit from dust and water.
NB:
The collar-receiver will keep for 20 seconds if it needs recharging.
-7-
-8-
Operating Guide
4. Charging Hole:
for collar-receiver charging.
Содержание PET916
Страница 1: ...www ipets mall com...
