A B C
Vibration mode: under this mode, the receiver will vibrate except level 0; press
Up/down button, it can adjust Vibration level from 0 to 99.
1, 2, 3 are the groups of memories which save the data of the level of sound,
vibration and static shock of each group.
5. Up/down button:
Intensity level button for Sound, Vibration and Static Shock modes.
7. M 2 button:
press this button to save the group level you just choose.
6. M 1 button:
press this button, you can select which group you want to save the level
of each mode: beep, vibration and static shock. Each Channel has up to 3 group
memories. M2 button to save the levels.
8. Launch button:
after finishing mode selection, press this button to send the signal
to the collar reciever.
9. Mode button:
include 3 modes as Beep Sound, Vibration and Static Shock Mode.
Contact Points:
Deliver the safe static
correction
Charging hole:
Charge for
Receiver
Collar
Rubber Cover:
Seal charging hole to
keep from dust
On/ Off/Encode Button
turn on/off the Collar
Receiver and hold it to
enter encoding status
A
When charging the battery, the red LED light shows up and changes to green LED
after fully charged.
B
When Standby, the
Receiver will flash green LED light every four seconds.
Collar
D
C
After turning on the
Receiver, press and hold the On/Off/Encode button
for 5 seconds to enter encoding period The green LED light will keep flashing for 10
seconds to indicate the encoding time.
Collar
D
Special waterproof design for Antenna.
Features
1. Remote Transmitter and chargeable
C
Receiver ollar
2. Waterproof
Receiver means your pet can swim in the water
Collar
3. Up to 1000 meters remote control distance
4. Free combination among three modes Beep Sound, Vibration and
Static Shock
5. 99 levels of Beep Sound
6. 99 levels of Vibration
7. 99 levels of Static Shock (optional)
8. Power save:
The
receiver will go into deeply sleep if no operation for 5 minutes.
movement will activate the receiver.
collar
And any
The transmitter will go into STANDBY MODE if there is no operation after 2
minutes and go into deeply sleep after 5 minutes, press any button can activate the
transmitter from Standby mode and press Mode button for 5 seconds to activate the
transmitter from deep sleep mode.
9. This system can be expandable to 3
Receivers.
Collar
10. Two pairs of metal prong (short/long) to suit dogs with varied fur thickness.
11.
Receiver Lithium battery: 3.7V 240 mAh Lip
Collar
How the
with Rechargeable and Waterproof Receiver
Collar Works
Multi-Dog Training System
Multi-Dog Training System with Rechargeable and Waterproof
Receiver Collar has been proven safe, comfortable, and effective for all pets
over 25 pounds. This system assists you in controlling your pet without a leash
in a range up to 1000m. At the push of a button, the Remote Transmitter sends
a signal, activating the Collar Receiver . Using the Remote Trainer consistently
and correctly, much misbehavior that you pet exhibits can be corrected or any
basic obedience commands can be taught.
6
7
Static Shock mode: under this mode, the receiver will shock except level 0; press
Up/down button, it can adjust Static level from 0 to 99.
Important:
This Training System has a range up to 1000m. Depending on
the way you hold the Remote Transmitter, the range may vary. Hold the
Remote Transmitter in a horizontal position away from your body to achieve
optimum range. Terrain, weather, vegetation, transmission from other radio
devices, and other factors will affect the range of your Remote Trainer.
