6
RECONNECTING “THE OTHER DOOR”
THE OTHER DOOR
®
GENERATION II STEEL CRATE • PG5927B/PG5936B/PG5942B
These are the necessary steps to reconnect “The Other Door” back onto your steel crate.
Step 1. Place crate with wire side on
the floor (Figure A).
De-clip top and flip down (Figure B).
Step 3. Lay door flat as shown
in Figure E. Make sure door
guides are aligned with their
tracks (Figure E) and slide
door into track.
Step 2. Align door at an angle with screw side
facing the crate, as shown in Figure C. Make sure
plastic knobs on both sides are near tracks so
that when the door is straightened, knobs will
click inside tracks and be re-attached (Figure D).
Bottom
Top
Plastic Knob
Door Guide
B.
C.
D.
E.
A.
