I-GO2 SPORT • PG1210
3
Step 1. Push down on Reinforcement Board,
inside of the IGO2 Sport, until it is flat, as shown
in Figure A.
To attach carrying strap, clip each end of the carrying
strap to the two plastic rings, located near the top of
the I-GO2, shown in Figure C.
Step 2. Lift up the hook & loop fastener strips,
so they are above the Reinforcement Board as
shown in Figure A.
You will need the hook & loop fastener strips to
attach Fleece-Top Comfort Liner. See Step 3.
Step 3. Place Fleece-Top Comfort Liner inside
the I-GO2 Sport and fasten into place, using the
two hook & loop fastener strips. See Figure B.
A.
ASSEMBLY
TO ATTACH CARRY STRAP
B.
C.
