~ 5 ~
INSTALLATION
PRO-HDMI-BNC
PRO-HDMI-BNC
HDMI
Coaxial
Cable
HDMI Cable
HDMI
HDMI Display
C
R
L
LS
LB
RS
RB
1.
Connect a HDMI source to the transmitting unit PRO-HDMI-BNC-TX.
2.
Connect a HDMI display or projector to the receiving unit PRO-HDMI-BNC-RX.
3.
Connect a coaxial cable between the transmitting and receiving units.
4.
Make sure this coaxial cable is tightly connected and not loose.
5.
Plug in 5V DC power supply units to the latch-locking power jack on the both transmitting and
receiving units of PRO-HDMI-BNC.
Connection Diagram
1.
Since PRO-HDMI-BNC is sensitive to the HDMI source’s input jitters, the input HDMI signals
with larger jitters will shorten the transmission distance significantly, especially at full HD
1080p60 mode.
2.
All HDMI over coaxial transmission distances are measured using Belden 1694A coaxial cable
and ASTRODESIGN Video Signal Generator VG-859C.
3.
If your HDMI display has multiple HDMI inputs, it is found that the first HDMI input [HDMI
input 1] generally can produce better transmission performance among all HDMI inputs.
NOTICE
