3
2.
Compatibility
2.1.
Compatible gearbox shells
Perun V3 Optical was tested with positive outcome in gearbox shells manufactured by: G&G,
E&L, LCT, Ultimate, JG and Cyma (stock Cyma gears may however need modification). This
refers to gearbox shells in Tokyo Marui standard. Perun V3 Optical will not work in gearboxes
diverging from that standard, like for example ARES EFCS.
2.2.
DSG
Perun V3 can be used in replicas utilizing dual sector gear, in that case it is recommended to
enable AB and disable precocking.
2.3.
Max Torque gears
Perun V3
Optical
cannot be used with Max/Infinity Torque gears, because in their case sector
gear teeth are seen at all times, making cycle detection impossible.
2.4.
Main spring rate and rate of fire
Perun V3 can be used with any main spring, as it was tested with positive outcome even with
M210 spring. The highest allowed rate of fire is 50RPS.
2.5.
Batteries
Allowed battery voltage - 7V to 17V, which permits use of the following battery types:
Li-Po, 2 to 4 cells (7.4V to 14.8V)
NiMH/NiCd, 8 to 10 cells (9.6V to 12V)
Li-Fe, 3 to 4 cells (9.9V to 13.2V)
Batteries with any discharge rate („C” parameter) or capacity (mAh) can be used, as long as
they are strong enough to power the replica properly.
