YH414561/YH414562/YH414563/YH414564 Learning Universal Remote Control
3
SET—For you start to set up the remote control.
PROJECTOR
AMP
DVD
TV
—Let you select the device you want to control.
—Turns the device on and off .
0-9—The number keys operate the same as on your original remote control, and maybe
also used for entering device codes when set up.
Keystone ± —Keystone correction increment with decrement. (Projector)
Zoom± —Zoom increment with decrement.(Projector)
Source —Input source selection when OSD off.(Projector)
BLANK MODE— Display blank.(Projector)
RESYNC— Auto adjustment for phase, tracking,size,position when OSD off.(Projector)
LEARN— For you start to learn the remote control.
MENU —Works like the Menu or OSD (on-screen display) or Memory key on your
original remote control.
CH± —Works like the Channel Up and Down keys on your original remote control.
VOL± —Control the volume like the Volume Up and Down on your original remote
control.
Mute /OFF To mute the sound or power off.
REW
fast reverse
PLAY (operate your DVD, CD etc)
FFWD (fast forward)
REC (Record)
STOP (terminate your operation)
PAUSE
ENTER
EXIT Works like the UP
DOWN
LEFT
RIGHT
ENTER
EXIT Keys on your original remote control for menu function.
RED
GREEN
YELLOW and BLUE: for TV Fast Text.
Battery Installation
This remote control needs 2 AAA batteries to work with. Fresh Alkaline batteries are
recommended. To install the batteries:
1. Turn the remote back, and lift the battery cover off.
2. Insert the batteries, matching the batteries to the (+) and (-) marks inside the
battery compartment.
3. Slide the battery cover back into place.
All data you have set up into the unit will be stored in memory even you take off the
batteries, but you may need to set the clock again.
Set Up
A. Set up by Brand Code:
1. Switch on the device, which you would like to control (e.g. Projector set).
2. In the back section of this manual, find the brand name and code no of your device
brand (e.g. Optoma 012, 013, 014…).
Note: the codes must be in the column for the corresponding device group.
3. Hold down the SET key and actuate the device key (e.g. Projector ) at the same time.
The POWER key on your remote control lights up, that means it is in the setting
up mode.
4.You must now enter the 3-digit device code (e.g. 012 for Optoma Projector) within 10
seconds. If no entry within 10 seconds, the setting up mode is automatically terminated.