Before use
Intellectual Property Rights
09
Installation of optional items
1. Rod antenna
Screw in the rod antenna to
antenna port firmly.
Turn on the unit, and simulate antenna
position till best reception is obtained.
When using on table, unfold the sup-
port bar from the rear, and stretch it to
convenient angle.
2. Indoor wall adapter
When using the product at home,
please replace cigar lighter charger with
indoor wall adapter like above diagram.
Before use
Intellectual Property Rights
10
3. Support bar
Insert connection joint
in the set bracket rail,
and screw it tight.
Before placing the whole set of unit,
please clean up mounting floor. Peel
off protection vinyl from adhesive
tape when ready.
Place the whole set on the floor (on
dash board or else), and make sure
adhesive tape hold the set firmly.
Unscrew rear screw to
adjust angle. Fasten the
rear screw when the
adjust is done.
Place the DMR132 on
the set bracket and fas-
ten locking screw.
On-dash mounting bracket works more stable than on-glass mounting bracket.
It is matter of choice and matter of convenience.
4. On-dash mounting bracket
