Before use
06
Before use
Intellectual Property Rights
05
1. Product installation
Insert connection
joint ( ) in the set
bracket rail.
Tighten screw ( ) till
two brackets are
firmly fixed. And
tighten locking
screw ( ).
Secure proper space on
front glass. Place suction
cup on the glass and
push the suction lever
over the suction cup.
Bend zebra rod to
secure best visual
angle.
Place DMR132 on set bracket. Insert screw in the
screw hole at bottom of DMR132, and screw it tight.
For installation in deep winter, the suction cup
may become too hard to use. Place it under hot
air blow to make it soft before installation.
DMR132 may too much shake while driving if it
hangs high in the air. Adjust height of suction
cup, and bend zebra rod to have lower part sup-
ported with vehicle dash board.
Product installation
For safety reasons, it is highly recommended to consult installation work with local
installation shops or dealers. Installation work may be different by car type.
For safety reasons, please have speed detector cable engaged with tachometer at all
times.
Far safety reasons, please turn off the engine for the entire installation procedure.
F r o n t
glass
dashboard
(Mounting bracket)
(Set bracket)
