9
1.8 Device Overview-Operational Check
The OttoView-CD system is operational when all LEDs are solidly lit.
Figure 12: OttoView™-CD device with all LEDs illuminated when the device is fully operational
1.9 Device Mounting Location
Identify the area under the dash where the OttoView-CD device will be located. The left hand
side with the SD card slot should be clear of any cables and accessible to insert and remove
the memory card.
Using the tie wraps, slide one end through the slot on the tie wrap mount located on the back
of the device. After securing the device, use a second tie wrap to secure the cables. Ensure
that there is no tension that would allow the connectors to disengage.
Figure 13: OttoView™-CD device installation with all cabling
