19
In the case of system set, press
【▲】
and
【▼】
to move the cursor to the option of Reset System,
then press
【
ENTER
】
to gain access to the menu of reset system.
(Fig. 3-20)
In the case of reset system, press
【▲】
and
【▼】
to move the cursor to the required option, then
press
【
ENTER
】
.
The original parameters setting:
Module Style: 8-cell changer
Cell Number: 5
Reagent Blank: No
Cell Blank: No
Change Lamp Wavelength: 359.9nm
Dark Current: reset
The instrument will remember the parameters, which is set according to the user’s requirements. It is
not recommended to reset system.
⊙
Input Change Lamp Wavelength
In the case of system set, press
【▲】
and
【▼】
to move the cursor to the Change Lamp WL, then
press
【
ENTER
】
to input value.
(Fig. 3-21)
At the bottom of this page, enter the wavelength by pressing the numeric keys (0~9) and decimal point
【．
】
. Press
【
RETURN
】
key to clear the mistakes, and press
【
CE
】
to clear step by step, then press
【
ENTER
】
key to confirm . Press
【
ENTER
】
key to confirm and quit. If nothing is to be entered, press
【
RETURN
】
key to quit this page directly. A 3-digit figure entry is allowed. The range is from 300 to 400.
If the entered figure exceeds the range and you have pressed
【
ENTER
】
, the system will delete what has
been entered automatically and you should start a new entry again.