Perry 1TPTE028A, Руководство пользователя, Страница: 32 / 64

CONTENTS ENGLISH
2 - FACTORY SETTINGS
WARNINGS
page 33
DEVICE PRESENTATION
1 - TECHNICAL DATA
3 - KEY FUNCTIONS
4 - DISPLAY FEATURES
5 - INSTALLATION
5.1 - Overall dimensions
5.3 - Fastening the wall base
5.4 - Electrical connections
5.6 - Signalling batteries low or down
7 - USE OF THE THERMOSTAT
8 - STRUCTURE OF THE MAIN MENUS (use and configuration)
9 - ACCESS TO MENUS
10 - USER MENU
10.1 - Set WINTER or SUMMER mode
10.2 - Modification or disabling of set antifreeze temperature
page 33
page 34
page 35
page 36
page 37
page 38
page 38
page 38
page 39
page 40
page 41
page 42
page 43
page 44
page 45
page 46
page 46
page 46
32
EN
5.2 - Installation example page 38
6 - START THE THERMOSTAT
page 41
5.5 - Procedure to fasten or remove the
thermostat from the wall base
5.6.1 - Inserting or replacing batteries
10.3 - USER PASSWORD Menu (user) page 47
10.3.2 - Password modification or cancellation
10.3.1 - Entering the user password page 47
page 47
7.1 - Temperature adjustment from COMFORT to ECONOMY
(energy saving) and vice-versa
page 43
7.2 - Modification of T Set temperature set
page 43
7.3 - Temperature control pause
page 43
7.4 - OFF (disabling the thermostat)
page 44
11.1 - Access to configuration menu
11.2 - Change set language
11.3 - Type of temperature adjustment mode
11.3.1 - Selection of the temperature adjustment mode
(differential on/off or proportional)
11 - CONFIGURATION MENU (installer)
11.3.2 - Setting hysteresis for thermal differential ON-OFF
11.3.3 - Setting period duration for modulating Proportional
11.4 - Change unit of measure for temperature reading
11.5 - Correction of room temperature reading
11.6 - Max and min set temperature lock
(winter and summer mode)
11.7 - Probe menu
11.7.1 - No connection to separate probe
11.7.2 - Setting separate remote probe
11.7.3 - Setting floor probe
11.8 - Connection to external contact for remote
thermostat switching on/off
11.7.4 - Setting separate external probe
11.8.1 - Activation / disabling with a Telephone Programmer
11.8.2 - NO Duty - for normally open contact
11.8.3 - NC Duty - for normally closed contact
11.9 - Descaling cycle
11.10 - Display contrast adjustment
11.11 - Backlighting
11.12 - Entering and managing password
11.12.1 - Entering new password
11.12.2 - Password modification or cancellation
page 48
page 48
page 48
page 49
page 49
page 50
page 50
page 50
page 51
page 51
page 53
page 53
page 54
page 54
page 55
page 55
page 56
page 57
page 57
page 58
page 58
page 58
page 59
page 59
page 59
11.13 - Restore (Reset) page 60
11.14 - System software information
page 60
12 - POSSIBLE PROBLEMS AND SOLUTIONS
page 61