You can view or edit a previously saved program as follows (or as described in Chap. 4.1):
1. Press the
key on the main menu (normal operation) to access the first menu (
). Confirm with
.
MENU
PROG
OK
SET
2.Select the program that is to be viewed or modified using the
keys. Confirm with
.
OK
Press the
key consecutively for the settings to appear again and reconfirm them. Change a setting by using the
keys and confirm with the
key.
OK
OK
View or edit all the settings until
appears for a few seconds.
OKAY
Exit the
menu by pressing the
key twice.
PROG
MENU
SET
4.1.4.d) Combination of TIME / LUX programs
You can set the programs that start at a fixed time (TIME ON) and end when the brightness will exceed the threshold set in the program (LUX OFF).
- A program ends on the same day if the TIME ON setting is before midday
example: program start-up (TIME ON) at 05:30 and ends (LUX OFF) at sunrise according to the set threshold e.g. at 06:30 on the same day.
NOTE: once switch-off is implemented, i.e. the amount of light is higher than the set threshold, the program is terminated. If dimming occurs (e.g. cloudy weather or a storm),
the program will not be executed.
- A program ends the next day if the TIME ON setting is after midday
example: program start-up (TIME ON) at 22:30 and ends (LUX OFF) at sunrise according to the threshold set on the next day e.g. at 06:30.
NOTE: if during the program start-up set time (TIME ON), switch-off occurs before, i.e. the amount of light is higher than the set threshold, the program will last about 1 minute
and will then restart when dimming occurs and will terminate at sunrise the next day when the light will be higher than the threshold set.
4.1.4. ) Combining LUX / ASTRO programs
f
Programs can be set to start at sunset detected by the twilight sensor (LUX ON) and ends at sunrise the next day (ASTRO OFF).
4.1.4. ) Combining ASTRO/LUX programs
e
You can set the programs that start at astronomical sunset (ASTRO ON) and end at sunrise the next day (LUX OFF) when the brightness will be greater than
the threshold set in the program.
NOTE: if during program start-up (ASTRO ON), switch-off also occurs (LUX OFF), i.e. the amount of light is higher than the set threshold, the program will last about 1 minute.
The program will start again when dimming occurs and will terminate at sunrise the next day when the brightness will be higher than the threshold set in the program.
4.2) Vi
ing or modifying a program (ASTRO / LUX / TIME) already saved
sualiz
NOTE: if during the program start-up set time (TIME ON), switch-off occurs before, i.e. the amount of light is higher than the set threshold, the program is not executed
(example: TIME ON set to a fixed time: 7:30 and a LUX OFF threshold is set that switches off at about 06:20).
53
EN
Содержание ASTRO-LUX-TIME
Страница 96: ......