Perry Electric 1IC 7054, Руководство пользователя

Страница: 47 / 96

4.1.1) LUX/LUX type of program (twilight)
Note: this program can be activated if the sensor is connected and activated.
After having selected the program number, the channel (only for the dual-channel model) and the day as described in the procedure in paragraph 4.1:
Example type of program P01 LUX :
allows you to set programs that switch-on and off
according to the set brightness.
The program starts (LUX ON) when the brightness
value measured by the sensor is less than the set
threshold (e.g. at twilight) and ends (LUX OFF)
when the measured value exceeds the threshold
(e.g. sunrise of the next day).
Twilight operation
When the brightness received by the sensor is less than the set value, the relay will close the “LUX ON”
contact after a delay (about 15 sec.) called T on.
In contrast, when the brightness received by the sensor exceeds the “ ” set value, the relay will LUX OFF
open the contact after a delay (about 30 s) called T off.
If the display shows this indicates that the twilight sensor has not been activated:
press and proceed as described in paragraph 2.1 to activate it.
OK
P01
day 5 (Friday) day 6 (Saturday)
ON
OFF
T on
T off
1. On the request to select the type of program, c
ON UX OK
onfirm the flashing text with .
L
2. Use the keys to enter the LUX value at which the connected utility must switch-on (default 10 lux) .
Confirm with .
OK
3. Select the type of program with the keys. Confirm key.
OFF LUX
with the
OK
4. . Use the keys to enter the LUX value at which the connected utility must switch-off. Confirm with
OK
: the LUX value (OFF) must be greater than the LUX ON value entered in point 2, otherwise it will not be Important
accepted by the device and will appear for a few seconds on the display. Err
The display first shows , and immediately after the number of free programs left and then the last set program.
OKAY
Set a new program or press the key 2 times to exit: the display will show the main screen (normal operation).
MENU
IMPORTANT!
For a saved program on other days, copy
see the procedure in the paragraph 4. . 2
To change the switching on or switching off delay time or activate the twilight
override function, refer to the procedure described in Chap. 7.
47
EN