Perreaux Radiance R200i, Руководство пользователя

Страница: 21 / 76

22
4 4 4 4
Unpacking and Placement
The R200i is packaged for maximum protection. Please carefully read the
instructions below before proceeding to unpack the unit. Be extremely
careful.
Unpacking
Procedure
à Inspect both ends of the cardboard box and open at the end without
the central staple by slitting the reinforced tape at either side.
à
Fold back the flaps and tip the package on end and the inner box will
slide out.
à
Lay the inner box down flat and upright, open it conventionally by
separating the top tray from the bottom.
à Remove the polystyrene block at the front of the amplifier; this
contains the remote controller, batteries, screwdriver and white
cotton gloves.
à The product can now be removed from the bottom packaging. This
will be easier if you have someone to help you by holding the base of
the box.
à
Alternately, the bottom tray and amplifier could be tipped upside
down and the bottom packaging removed. If opened in this manner,
please ensure that you turn the contents over again.
Note: Be very careful to secure the unit if you are planning to flip the
package upside down.
à Remove the two white polystyrene protectors off either side of the
amplifier, leaving the black material covering.
à
Please use the white cotton gloves provided to assist with further
unpacking and placement of the R200i.
Note: The cover is made from black acrylic and the front panel features an
electroplate finish, both of which can easily be damaged. Please
take special precautions when handling your amplifier.
à Pull back the material and remove the protective black tissue from
the front panel.
à
Carefully peel off the adhesive protective material on the R200i
cover.
The amplifier is now unpacked and ready for further installation.
Note: Please retain all packaging material for future transport.