Perreaux Radiance R200i, Руководство пользователя

Страница: 12 / 76

13
2 2 2 2
Special Design Features
An
Integrated
Amplifier?
Perreaux has been designing and manufacturing only the highest quality
audio componentry for more than a quarter of a century. Technology has
continued to evolve rapidly over that time and our knowledge and
application of design, materials and manufacturing techniques has
advanced in tandem with this. Today’s Perreaux range comes closer to
fulfilling our company’s shared vision than at any other time in the past.
The R200i has been developed to meet customer demands for compact
higher quality products. Careful attention has been taken throughout the
development phase, not to make compromises that would degrade the high
quality of reproduction that the unit is capable of delivering.
To follow is a discussion on some of the technological design features that
have been incorporated into the R200i.
Emphasis on
Size
At 430mm wide x 105mm high x 340mm deep (16.9” x 4.1” x 13.4”) it’s
low profile and small footprint ensure that the R200i can be used in almost
any environment.
Construction The milled aluminium front panel, thick black acrylic cover, functional
heat sinks and solid remote controller are all hallmarks of the Perreaux
brand.
The beautifully styled front panel is milled from solid 10mm (0.39 inch)
thick aluminium and offered in either Satin or Black Chrome electroplate
finishes. Inset within the elongated ellipse is a blue alphanumeric vacuum
fluorescent display, all functions are accessed via 5 individually backlit
push buttons.
The cover is manufactured from thick black acrylic. No cover fixing
screws are visible. A series of slots run down each side of the cover to
facilitate air ventilation.
By placing the heat sinks on the outside of the product, the R200i, they are
able to breathe freely and operate at highest efficiency.
The multifunction remote controller is small, stylish and ergonomically
designed for comfort. It is manufactured from cast zinc alloy and offered
in either Satin or Black Chrome electroplate finishes, matching the R200i
front panel.