Perreaux eloquence CDt, Руководство пользователя

Страница: 8 / 22

Sleeve Tip
5
Connecting - Rear panel
Important:
Before making any connections, switch off the mains power to all compo-
nents in your system.
1 Coaxial Digital Outputs
The coaxial digital outputs provide a SPDIF digital audio signal via a 75Ω
coaxial cable equipped with either RCA or BNC connectors.
NOTE: Only one of these connectors is active at any given time.
2 Optical Digital Output
The optical digital output provides a SPDIF digital audio signal via a stand-
ard Toslink (EIAJ) optical cable.
3 Trigger Input
The trigger input allows your éloquence CD Transport to be brought in and
out of standby by a remotely connected device; for example, another audio
component or a home automation system. The trigger input uses a mono
3.5mm (
8 ”) plug and accepts voltages of 0V DC up to 12V DC. A trigger
voltage between 3V and 12V DC will bring the transport out of standby and
it will enter standby when the trigger voltage is 0V DC.
The trigger input plug must meet the specifications shown below:
Sleeve: GND
Tip: Signal
4 Trigger Output
The trigger output allows your éloquence transport to control the standby
state of a remotely connected device. The remote trigger output accepts
a mono 3.5mm (
8 ”) plug. The trigger output voltage is 5V DC when the
transport is not in standby and is 0V DC when in standby.
The trigger output plug must meet the specifications shown (see over):
1 2 3 4 5 6 7 8 9