Perreaux Audiant 100p, Руководство пользователя

Страница: 6 / 16

5
Installation
Unpacking
The Audiant 100p is supplied with the following accessories:
• Mains lead
• This manual
We recommend you retain the packaging for reuse in case you need to transport the unit at a later date.
Placement
Your Audiant 100p Stereo Power Amplifier should generally be placed close to your preamplifier keeping
interconnect cabling short. Although when using balanced interconnects, the amplifier may be placed
further away from the preamplifier without degrading the sound.
Ventilation Requirements
Your Audiant 100p requires dissipating considerable power in the form of heat. It should be placed in a
position that does not restrict the airflow around it.
Allow at least 80mm (3 inches) above and to each side of the unit and mount the Audiant 100p on a flat
surface for air circulation to allow heat to dissipate.
Do not place directly onto a carpeted surface as it will reduce air circulation and the heat will not dissipate
as intended.
It the device is used in a cabinet, air must be able to flow through. An enclosed cabinet will severely restrict
heat dissipation.
Ensure that nothing is placed above or below the unit that might block or restrict the vents.
If the Audiant 100p has inadequate ventilation and/or is played very enthusiastically for a period of time,
its temperature may rise above the designated operating level and the over-temperature protection will trip
(see Protection System section).
Other Devices
Ideally, your Audiant 100p Stereo Power Amplifier should not be located directly above or adjacent to other
heat-producing products such as radiators, other power amplifiers, etc. If multiple amplifiers are being used
and space is restricted, placing them side by side is preferable to stacking.
Do not place another device directly on top of the Audiant 100p, it will restrict heat dissipation and prevent
the heat sink from operating as designed.
It is advisable to position your Audiant 100p away (and if possible, connected to a power socket on a
different circuit) from powerful electrical or electronic products such as TV sets, computers, cookers, fridges
etc. This will prevent the possibility of the strong electrical and electromagnetic emissions or interference
given off by such devices adversely affecting the performance of your amplifier.