Perreaux Audiant 100p, Руководство пользователя

Страница: 11 / 16

Care and Maintenance
Notes: Always switch the unit off and remove the power cord from the rear of the unit before attempting to
clean your Audiant 100p Stereo Power Amplifier in the manner described below.
Never apply liquid directly to the unit.
Never use abrasives.
Never rub in a circular motion.
Front Panel and Cover
The front panel and cover feature a durable, high-quality anodised finish. To remove finger marks and dirt,
simply rub the surface with a soft cloth.
If the dirt is not removed, use a small quantity of isopropyl alcohol on a clean cloth and rework the effected area.
Troubleshooting
There is no power
Ensure the AC power cord is connected securely.
Ensure the mains plug is fully inserted into the wall socket and is switched on.
Check the mains fuse of the unit.
Check fuse in the mains plug or adaptor.
There is no sound
Check that the source component is properly connected.
Check that the source component is playing.
There is no sound on one channel
Check interconnects.
There is a loud buzz or hum
Ensure no interconnects are loose or defective.
Ensure that your tape deck/turntable is not too close to the amplifier.
There is weak bass or diffused stereo imaging
Ensure the speakers are wired in the correct polarity, the +ve terminal of the loudspeaker should connect to
the +ve speaker output terminal of the amplifier, and likewise, -ve to -ve.
The Standby LED is flashing
The protection system of the amplifier has tripped and needs to be reset (see Protection System section).
10